HP Workstation xw6000 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 206
The C:ID:L Column, The Device Type Column, C:ID:L, Device Type
View all HP Workstation xw6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
Adaptec SCSI RAID Software Reference Guide AAC0>disk list Executing: disk list C:ID:L Device Type Blocks Bytes/Block Usage Shared Rate 2:00:0 Disk 8887200 512 Initialized NO 40 2:01:0 Disk 8887200 512 Initialized NO 40 2:02:0 Disk 8496960 512 Initialized NO 40 2:03:0 Disk 8887200 512 Initialized NO 40 The detailed disk list display contains the previous columns of information plus the following columns: ■ Removable media ■ Vendor-ID ■ Product-ID ■ Rev The following sections provide more information on the columns of information that the disk list command displays. The C:ID:L Column The C:ID:L column displays the SCSI device channel number, the SCSI device ID, and the SCSI device logical unit number for each disk on the currently opened controller. (The display shows only one disk if you specified a particular disk.) In the example, the command displays the SCSI channel number, the SCSI device ID, and the SCSI device logical unit number for the four disks on the open controller. The Device Type Column The Device Type column displays the SCSI device type. The disk list command can display one of the values listed in Table 7-1. Table 7-1. Device Type Values Value Disk Sequential Meaning The device type is a SCSI direct access device. Typically, these are disk drives. This value appears in the example. The device type is a SCSI sequential access device; typically, tape drives. 7-6