HP Workstation xw6000 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 345
The WaitForBuild Keyword, The WriteCache Keyword, Wait=Yes, Wait=No, WaitForBuild, WriteCache, Always
View all HP Workstation xw6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 345 highlights
Using the Array Configuration Utility Examples: Wait=Yes Wait=No The WaitForBuild Keyword The WaitForBuild keyword is provided for backward compatibility only. Use the Wait keyword instead. The WaitForBuild keyword is still recognized and can be used interchangeably with the Wait keyword. The WriteCache Keyword The WriteCache keyword indicates whether write caching is used for this array if write caching is supported for the system. Possible values are as follows: ■ Yes-Enable the write cache if the cache is protected by a battery and the battery's status is OK. ■ No-Disable the write cache. ■ Always-Enable the write cache even if no battery is present, or the battery's status is not OK. Note: Setting an array's WriteCache property to Always might result in data loss or corruption if power to the controller is lost when no battery is present or the battery loses its charge. If no WriteCache property is specified, the value Yes is used. Examples: WriteCache=Yes WriteCache=Always 1 Array build/verifies and clears are tasks executed entirely on the controller and do not depend on the ACU or any other host application to complete. If the controller is powered off before the build/verify or clear completes and is then restarted, the build/verify or clear task resumes without any user intervention. 13-23