HP Workstation xw6000 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 205
disk list
View all HP Workstation xw6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
disk Commands disk list To display a list of the disks available on the currently opened controller, use the disk list command. Syntax disk list [/all{=boolean}] [/full{=boolean)] [{scsi_device}] Parameters {scsi_device} Specifies the ID for a specific SCSI device for which you want to display information. A SCSI device consists of a SCSI channel number (for example, 0, 1, 2, 3, etc.), SCSI device ID (0 through 15 inclusive), and SCSI device logical unit number (0 through 7 inclusive). See the scsi_device section on page 3-7 for more information on how to specify the SCSI device. Switches /all{=boolean} Specifies whether to display a list of all SCSI devices. If you set this switch to TRUE, the command displays a list of all SCSI devices on the controller. This switch defaults to FALSE if you specify scsi_device. Otherwise, the switch defaults to TRUE. /full{=boolean} Specifies whether to display detailed information. If you specify TRUE, the command displays detailed information. If you specify FALSE, the command does not display detailed information. This switch defaults to FALSE. Examples The following example shows how to display nondetailed information for all of the SCSI disks on the currently opened controller: 7-5