HP Workstation xw6000 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 255
The Done% Column, The Array Column, The State Column, Array, State
View all HP Workstation xw6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 255 highlights
task Commands Task Type Verify Zero Table 10-1. Task Types (Continued) Meaning A verify with no repair of bad blocks task is running on the specified SCSI disk. When the verify with no repair of bad blocks task completes, the specified SCSI disk's blocks were verified without repairing any detected defects. The verify with no repair of bad blocks task runs as a result of using the disk verify command without specifying the /repair switch. Or, a verify with repair of bad blocks task is running on the specified SCSI disk. When the verify with repair of bad blocks task completes, the specified SCSI disk's blocks were verified and any detected bad blocks were repaired. The verify with repair of bad blocks task runs as a result of using the disk verify command with the /repair switch. A clear disk task is running on the specified SCSI disk. When the clear disk task completes, the specified SCSI disk is cleared (that is, all data is erased and cannot be recovered). The clear disk task runs as a result of using the disk zero command. The Done% Column The Done% column displays a running percentage value that indicates the progress of the currently running task. The display shows the percentage in tenths of a percent increments. The currently running task is complete when the Done % column displays 100%. The Array Column The Array column displays the ID number of the array associated with the task (if any). In the example, the array's ID is 0 (zero). The State Column The State Column displays the state of the task. Table 10-2 describes the state values that the task list command can display. 10-5