HP Workstation xw6000 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 75

container Commands Although the drive is immediately available, it is not parityprotected until the background scrub action completes. This switch defaults to TRUE. If you set this switch to FALSE, the command will set up parity by clearing the RAID-5 set. In other words, setting / scrub=FALSE enables the same behavior as /clear=TRUE. This switch is supported on the following operating systems: ■ Windows NT ■ Windows 2000 ■ Windows XP ■ NetWare For UNIX, the RAID-5 set is always scrubbed. /wait{=boolean} Specifies whether the command prompt returns only after the parity-protect operation completes. If you set this switch to TRUE, the command prompt returns only after the RAID-5 set is parity-protected. The scrub or zero action completes. The default is FALSE; the command prompt returns immediately before the parity-protect operation completes. Examples The following example creates a RAID-5 set with the following characteristics: ■ Creates the RAID-5 set on four disk drives connected to channel 0 ■ Specifies a freespace of 10 MB ■ Uses the scrub method ■ Indicates the command prompt return only after the scrub operation completes ■ Specifies a stripe size of 64 KB ■ Accepts the default label 5-27