HP Workstation xw6000 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 282

Adaptec SCSI RAID Software Reference Guide enclosure set interval To set the monitor reporting interval for a specific SAF-TE enclosure management device, use the enclosure set interval command. The monitor reporting interval indicates how often the controller checks the status of the enclosure management device and its associated components. In setting this value, consider the needs of your computing environment. Setting the monitor reporting level to less than ten seconds could cause slower system performance. Syntax enclosure set interval {second} Parameters {second} Specifies the number of seconds for the monitor reporting interval. You can specify 1 to n seconds where n represents the number of seconds for the monitor reporting interval. (The maximum value is 86,400, the number of seconds in a day.) The default is 10 seconds. Examples Before setting the monitor reporting interval, you might want to use the enclosure show status command to determine the current monitor reporting interval setting. As the following example shows, the current monitor reporting interval setting is 10: AAC0>enclosure show status Enclosure UpTime D:H:M PowerCycle Interval Door Alarm 0 0:00:00 0 10 UNLOCKED OFF . . . Enclosure UpTime D:H:M PowerCycle Interval Door Alarm 1 0:00:00 0 10 UNLOCKED OFF 11-18