HP Workstation xw6000 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 253

task Commands As the example shows, the typical display shows the following columns of information: ■ TaskId ■ Function ■ Done% ■ Array ■ State ■ Specific1 ■ Specific2 The following sections describe each column that the task list command displays. The Task ID Column The Task ID column displays the ID number associated with a specific task. The controller software assigns each task a unique ID number. The Function Column The Function column displays the type of task running on the controller. Table 10-1 describes the types of tasks that the task list command can display. Task Type Create FATfmt Table 10-1. Task Types Meaning A create mirror set or create multilevel mirror set task is running on the specified array. When the create mirror set or create multilevel mirror set task completes, the specified array is a mirror set or a multilevel array of mirror sets. The create a mirror set or create a multilevel mirror set task runs as a result of using the array create mirror or array create mmirror command. An array format FAT file system task is running on the specified array. The format FAT file system task runs as a result of using the array format command with the / file_system switch set to FAT. 10-3