HP Workstation xw6000 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 337

Using the Array Configuration Utility arrays. Consequently, the parent task indicates 0% to 100% and the child tasks always indicates 0%. Build/Verify Operations on RAID 10 Arrays For a RAID 10 array, the status message indicates the percent of the build/verify completed for the parent and child tasks. The status updates to OK when the tasks complete. A sample RAID 10 build status is as follows: Array #1 Status : BUILD/VERIFY = 30% Build/Verify Operations on RAID 50 Arrays For a RAID 50 array, the status message indicates the percent of the build/verify completed for the parent and child tasks. The status updates to OK when the tasks complete. A sample RAID 50 build/ verify status is as follows: Array #1 Status : BUILD/VERIFY = 30% Script File Syntax An ACU script file consists of one of the following: ■ Array definition block-Specifies the properties of an array, such as type, size, and cache settings. The block begins with the keyword Array and ends with the keyword End. ■ Channel definition block-Specifies the properties of a controller channel, such as ControllerID. The block begins with the keyword Channel and ends with the keyword End. Each array or channel property consists of a property keyword and assigned value, separated by an equal sign (=). Each property must be on its own line in the script. The order of properties within a block (other than the starting Array or Channel keyword, and the ending End keyword) is not significant. Some array properties, such as Type, are required; others are optional. Table 13-4 lists and describes array definition block properties, indicates which properties are optional, and provides the default value used when that property is not specified. All keywords can be written in any combination of upper- or lowercase characters. Script lines can include any number of spaces and tabs both within keywords, or when separating keywords and their values. Blank lines are ignored. 13-15