IBM TS2340 User Guide - Page 205

dd000002 Windows System-Managed Encryption Windows Server 2008 only, and therefore only contain 2k3 and 2k8 files. Figure 32. Checked folder 4. Copy the checked version of ibmtpxxyyy.sys or ibmcgxxyyy.sys to \winnt\system32\drivers, overwriting the version of the file already there. 5. Reboot the system. 6. Start the debugger to capture the DbgPrint messages. 7. Issue the commands to the driver. You should see debug statements printed to the debugger window. Windows 2008 Instructions 1. Quiesce all activity on the tape and medium changer. 2. Exit all applications that are using the tape and medium changer devices. 3. If the driver is currently installed perform the Uninstall the devices procedure described in a previous section. 4. Locate the \checked folder described at step 3 from the Windows Server 2003 instructions and additionally of the .sys files you will find .inf and .cat files. This is because Windows 2008 drivers are digitally signed. 5. Copy the files from the \checked folder to the highest level directory of the driver package overwriting the files in there (a previous backup of this files or having a copy of the original driver package is recommended). 6. Perform the Installation procedure. 7. Follow steps 6 and 7 from the Windows Server 2003. Restoring the Non-Debug Version To restore the non-debug version of the driver, perform the following steps: 1. Quiesce all activity on the tape and medium changer devices. 2. Exit all applications that are using the tape and medium changer devices. Chapter 7. Windows Tape and Medium Changer Device Driver 187