IBM TS2340 User Guide - Page 299

a2500251 IBM Tape Diagnostic Tool Figure 80. Firmware Update screen The following site is available for the latest firmware files: http://www.ibm.com/systems/support/storage/tape Download the files to the ITDT-SE input subdirectory that was created during the installation. The following are examples of the directory: Example input directory (Windows): c:\itdt\input Example input directory (Unix): /home/user/itdt/input Example input directory (i5/OS): /home/itdt/input (on the IFS) use FTP or the i-Series Navigator to transfer the file To do a Firmware Update perform the following steps: 1. Start ITDT-SE, then type S and press the Enter key to scan for the devices. 2. Select the device you want to update by typing the number of the device and pressing the Enter key. 3. Type F and press the Enter key to display the Firmware Update screen. 4. To select the needed firmware update perform one of the following: v If the firmware file you downloaded is listed in the Content field of the Firmware Update screen, type the corresponding line number and press the Enter key. v If the firmware file is stored in a directory other than the one displayed in FW Dir, then type F followed by a space and the fully qualified path to the directory containing the firmware file, then press the Enter key. For example, enter the following to change the firmware directory (Unix): f /home/user/firmware v If no files are displayed in the Content field, check the Dir OK field on the right side of the screen. It indicates true if the directory exists, false otherwise. v If the content of the displayed FW Dir has changed, type D and press the Enter key to refresh the directory content. Chapter 10. IBM Tape Diagnostic Tool (ITDT) 281