IBM TS2340 User Guide - Page 367

Linux - Verifying Proper Attachment of Your Devices 3. Enter 1 (Open a Device). 4. Enter /dev/IBMchanger0 when prompted for the device name. 5. Enter 3 (Inquiry). Specify 0 when prompted for an inquiry page. This concludes a very basic test of the device, SCSI connection, and the device driver. You may stop the test here or continue to perform a more complete test as follows: 6. Enter 4 (Test Unit Ready). 7. Enter 60 (Element Information). 8. Enter 62 (Element Inventory). 9. From the output of the previous step, select a writable, scratch cartridge and determine its element ID. Also, select the element ID of an unoccupied slot. 10. Enter 64 (Move Medium), then supply the address of the cartridge, followed by the address of the unoccupied slot. Verify that the cartridge moved. 11. Enter 62 (Element Inventory). Verify that the inventory was updated correctly. 12. Enter 2 (Close a Device). 13. Enter Q (Quit Program). 3494 Enterprise Tape Library Attachment Test The following procedure tests the attachment of a 3494 Enterprise Tape Library to a Linux system. The procedure assumes that your device is defined in /etc/ibmatl.conf as L3494. 1. Bring up a shell prompt. 2. Enter mtlib -l L3494 -ql 3. Enter mtlib -l L3494 -qL Appendix B. Verifying Proper Attachment of Your Devices 349