IBM TS2340 User Guide - Page 361

Appendix B. Verifying Proper Attachment of Your Devices Before you start to use your devices for production work with your applications, or if you encounter difficulties with your devices, you may want to verify that the hardware, connections, and device drivers are working together properly. Before you can do this, you must do the following: 1. Install your hardware as indicated in the appropriate hardware manuals. 2. Power On your hardware and verify that the hardware is functioning properly by executing commands from the front panel. 3. Attach your hardware to the host system as indicated in the appropriate hardware manuals and as indicated in the appropriate chapters from this manual. 4. Start your operating system as indicated in the appropriate chapters from this manual. 5. Log into the operating system as Administrator. 6. If there are device drivers being used by your device other than the ones documented in this manual, disable the other device drivers, and install or enable the drivers documented in this manual. 7. Follow the subsequent instructions for your host system. © Copyright IBM Corp. 2007, 2009 343