IBM TS2340 User Guide - Page 340

IBM Tape Diagnostic Tool 1 2 a2500225 Figure 95. Dump Results Note: When the Dump function is performed for tape libraries or autoloaders other than the 3584/TS3500, the Log file only contains Log Sense and Mode Sense pages, while a Drive or 3584/TS3500 Dump contains much more diagnostic information. ( 2 ) Firmware Update The Firmware Update upgrades the firmware of tape drives and tape libraries. See "Supported Equipment" on page 263 for a list of supported products. Note: See "3576/TS3310 Tape Library" on page 273 for more information on how to update the firmware on a 3576/TS3310 Tape Library. The following site is available for the latest firmware files: http://www.ibm.com/storage/lto To do a Firmware Update perform the following steps: 1. Select the device you want to update. 2. Select the Update menu item. 3. A standard file dialog opens to select the path of where the firmware update is located. The path is either the default input path or the location of the last successfully opened firmware file. Press OK button on this file dialog to start the update on the selected device. During the firmware update, a firmware update progress screen is displayed, indicating the progress of the update. Attention: Once started, do not interrupt the firmware update. The firmware update usually takes 3-5 minutes, but it can take up to 45 minutes for libraries. 322 IBM Tape Device Drivers Installation and User's Guide