IBM TS2340 User Guide - Page 297

a2500236 IBM Tape Diagnostic Tool During POST A stopping the test is not allowed. 5. Performance Test 6. Unmount Medium 7. Get FSC 8. Get Logs The test can be stopped by typing A followed by the Enter key at any time except during the POST tests, which are not interruptible. Note: It may take some time until the test actually stops. Figure 78. Test Results When all sub-tests are finished, ITDT-SE shows a screen that displays the attachment and device information as in the first device list screen, together with the test result and failure information in the code field. The screen also shows the output files that were generated during the test run. The files may be requested by the IBM Support Center. If you want to use other ITDT-SE functions, type R followed by the Enter key to return to the first device list screen; otherwise, type Q followed by the Enter key to exit the program. Dump Perform the following to start the Dump [D] process: 1. Start ITDT-SE, then type S and press the Enter key to scan for the devices. 2. Select the device you want to retrieve a dump from by entering its number and press the Enter key. 3. Type D and press the Enter key to start the dump retrieval for the selected device. The ongoing dump process is performed (it takes less than 1 minute). Chapter 10. IBM Tape Diagnostic Tool (ITDT) 279