IBM TS2340 User Guide - Page 256
Adding or Deleting Entries in the Library
UPC - 883436006873
View all IBM TS2340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 256 highlights
Solaris 3494 Enterprise Tape Library Driver the IP address of the Library Manager. If the Library has a dual LAN card installed, the second IP address of the dual LAN card should be entered after the first IP address. Identifier is used to specify a name by which the Library Manager identifies the host machine. This identifier has a maximum length of eight characters. The host name of the workstation is usually the best name to use (although it is not necessary). This parameter is used only to identify a particular host to the 3494 Enterprise Library Manager. Alternate LAN Connection is used to specify an alternate IP address for an Enterprise High Availability LAN-attached configuration. If the High Availability Library has a dual lan card installed, the second IP address of the dual LAN card should be entered after the first alternate LAN connection IP address. Note: For RS-232 attachments, the alternate LAN connection is not applicable. Failover for RS-232 connections proceeds over the single serial line. The following examples show how to define the library name: 3494a /dev/ttya mercury This stanza defines the 3494a library that is connected by /dev/ttya to the workstation. The library uses the mercury identifier for the host. 3494b 9.115.32.21 jupiter This stanza defines the 3494b library that is connected through TCP/IP to the workstation. The address of the Library Manager on the Enterprise Tape Library is 9.115.32.21. The library uses the jupiter identifier for the host. libmgrc9 9.115.46.15 telos 9.115.46.17 This stanza defines the libmgrc9 High Availability library that is connected through TCP/IP to the workstation. The IP addresses of the dual Library Managers are 9.115.46.15 and 9.115.46.17. libmgrc7 9.115.32.21 9.115.32.22 mercury This stanza defines libmgrc7 with a dual LAN card connected through TCP/IP to the workstation. The first address of the Library Manager on the 3494 Tape Library is 9.115.32.21 and the second address is 9.115.32.22. The library uses the mercury identifier for the host. The following stanza defines the libmgrc7 High Availability library with dual LAN cards connected through TCP/IP to the workstation. The IP addresses of the first Library Manager are 9.115.32.21 and 9.115.32.22. The IP addresses of the second Library Manager are 9.115.26.13 and 9.115.26.14. The library uses the mercury identifier for the host. libmgrc7 9.115.32.21 9.115.32.22 mercury 9.115.26.13 9.115.26.14 Adding or Deleting Entries in the Library You can add or delete entries in /etc/ibmatl.conf at any time. However, changes do not take effect until the daemon is started again. Use the UNIX kill command (kill -kill ) to kill the lmcpd process, then enter the /etc/lmcpd command to start the daemon again. Ensure that the library activity on all of the libraries is completed before restarting the lmcpd. 238 IBM Tape Device Drivers Installation and User's Guide