IBM TS2340 User Guide - Page 313

IBM Tape Diagnostic Tool 2. ITDT issues Report Density Support ioctl command to retrieve all supported media. 3. ITDT prints all requested reports. Data is printed in a decoded way. Scroll the screen to print each one of the following: v Density name v Assigning organization v Description v Primary density code v Secondary density code v Write OK v Duplicate v Default v Bits per MM v Media Width v Tracks v Capacity (megabytes). 4. ITDT prints report status text for current media 5. ITDT issues Report Density Support ioctl command to retrieve current media 6. ITDT prints report data in a decoded way. [38] Test Encryp. Path (Test Encryption Key Path/Setup) When you select the Test Encryption Key Path/Setup command [38]: Note: Not supported for the HP-UX operating system. 1. ITDT prints status message that server configuration and connections are tested 2. ITDT issues the Encryption Diagnostics ioctl command, Ping Diag 3. ITDT prints number of servers available or error message 4. ITDT issues the Encryption Diagnostics ioctl command, Basic Encryption Diag 5. ITDT prints completion code or error message 6. ITDT issues the Encryption Diagnostics ioctl command, Full Encryption Diag 7. ITDT prints completion code or error message. [50] Element Information When you select the Element Information command [50]: 1. ITDT issues the ioctl command 2. ITDT displays number of robots, first robot address, number of slots, first slot address, number of i/e elements, first element address, number of drives, first drive address. [51] Position to Element When you select the Position to Element command [51]: 1. You are prompted for destination address 2. ITDT issues the ioctl command. [52] Element Inventory When you select the Element Inventory command [52]: 1. ITDT issues the Element Info ioctl command. Chapter 10. IBM Tape Diagnostic Tool (ITDT) 295