Icom IC-7700 Instruction Manual - Page 124

7 VOICE RECORDER FUNCTIONS ■ Sending a recorded message T1 T2 T3 T4 EXIT/SET T/R F-1 F-2 F-3 F-4 F-7 Appears Counts down q Push EXIT/SET several times to close a multi-function screen, if necessary. w Select a phone mode by pushing SSB or AM/FM . e Push [VOICE] F-2 to call up the voice recorder screen. • If the receive voice message appears, push [T/R] F-7 to select TX message (T1-T4). r Push the desired message switch, [T1] F-1 to [T4] F-4 , momentarily to transmit the contents. • The transceiver transmits automatically. • " SEND " indicator appears and the memory timer counts down. • You hear the transmitted message from the speaker as the default. This can be turned OFF in voice set mode. (p. 7-9) t Push the selected message switch, [T1] F-1 to [T4] F-4 , again to stop, if desired. • The transceiver returns to receive automatically when all of the recorded contents in the message are transmitted. y Push EXIT/SET twice to exit the voice memory screen. ✔ For your information When an external keypad is connected to [EXT KEYPAD], the recorded message, T1-T4, can be transmitted without opening the voice recorder screen. See page 2-7 for details. D Transmit level setting DEF F-7 TX LEV. F-6 EXIT/SET Main dial q Call up the voice recorder screen as described as above. w Push [TX LEV.] F-6 to select the voice memory transmit level set condition. e Push the desired message switch, [T1] F-1 to [T4] F-4 , momentarily to transmit the contents. • The transceiver transmits automatically. • " SEND " indicator appears and the memory timer counts down. rRotate the main dial to adjust the transmit voice level. • Push and hold [DEF] F-7 for 1 sec. to select the default condition. t Push EXIT/SET to return to the voice recorder screen. 7-8