Icom IC-7700 Instruction Manual - Page 129
Memory channel programming
View all Icom IC-7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
8 MEMORY OPERATION ■ Memory channel programming Memory channel programming can be preformed either in VFO mode or in memory mode. D Programming in VFO mode Y Z MW [EXAMPLE]: Programming 7.088 MHz/LSB into memory channel 12. q Set the desired frequency, operating mode and filter width in VFO mode. w Push ∫ / √ several times to select the desired memory channel. • Memory list screen is convenient for selecting the desired channel. • Memory channel contents appear in the memory channel readout (below the frequency readout appears if the selected memory channel is a blank channel (and does not have contents). e Push and hold MW for 1 sec. to program the displayed frequency, operating mode, etc., into the memory channel. SSB or Beep MW Beep Push for 1 sec. Beep D Programming in memory mode [EXAMPLE]: Programming 21.280 MHz/USB into memory channel 18. or then 21 7 SSB Beep MW Beep Push for 1 sec. Beep qSelect the desired memory channel with ∫ / √ in memory mode. • Memory channel contents appear in the memory channel readout (below the frequency readout). appears if the selected memory channel is a blank channel (and does not have contents). w Set the desired frequency and operating mode in memory mode. • To program a blank channel, use direct frequency entry with the keypad or memo pads, etc. e Push and hold MW for 1 sec. to program the displayed frequency and operating mode into the memory channel. 8-3