Icom IC-7700 Instruction Manual - Page 166
Others set mode
View all Icom IC-7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
12 SET MODE ■ Others set mode Calibration Marker This item is used for a simple frequency check of the transceiver. (default: OFF) See p. 13-5 for calibration procedure. NOTE: Turn the calibration marker OFF after checking the frequency of the transceiver. Beep (Confirmation) A beep sounds each time a switch is pushed to confirm it. This function can be turned OFF for silent operation. (default: ON) The beep output level can be set in level set mode. (p. 12-6) Beep (Band Edge) A beep sounds when an operating frequency enters or exits an amateur band. This functions independent of the confirmation beep setting (above). (default: ON) The beep output level can be set in level set mode. (p. 12-6) Beep Sound Sets the desired key-touch beep frequency within 500 to 2000 Hz in 10 Hz steps. (default: 1000 Hz) Quick SPLIT When this item is set to ON, pushing and holding SPLIT for 1 sec. sets the unselected VFO's readout frequency to the selected VFO's readout frequency and activates split operation. (default: ON) See p. 6-7 for details. OFF ON ON 1000Hz ON 12-12