Icom IC-7700 Instruction Manual - Page 192
Command table continued
View all Icom IC-7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
14 CONTROL COMMAND D Command table (continued) Command 14 Sub command Description 18 + Level data 19 + Level data [CONTRAST] setting (0=max. CCW to 255=max. CW) [BRIGHT] setting (0=max. CCW to 255=max. CW) 15 01 Read squelch condition 02 Read S-meter level 11 Read RF power meter 12 Read SWR meter 13 Read ALC meter 14 Read COMP meter 15 Read VD meter 16 Read ID meter 16 02 Send/read Preamp setting (0=OFF; 1=preamp 1; 2=preamp 2) 12 Send/read AGC selection (0=OFF; 1=Slow; 2=Mid; 3=Fast) 22 Send/read noise blanker setting (0=OFF; 1=ON) 32 Send/read Audio peak filter set- ting for CW mode (APF type=SHARP: 0=OFF; 1=320 Hz; 2=160 Hz; 3=80 Hz, APF type=SOFT: 0=OFF; 1=WIDE; 2=MID; 3=NAR) 40 Send/read noise reduction setting (0=OFF; 1=ON) 41 Send/read auto notch setting (0=OFF; 1=ON) 42 Send/read repeater tone setting (0=OFF; 1=ON) 43 Send/read tone squelch setting (0=OFF; 1=ON) 44 Send/read speech compressor setting (0=OFF; 1=ON) 45 Send/read monitor setting (0=OFF; 1=ON) 46 Send/read VOX function setting (0=OFF; 1=ON) 47 Send/read Break-in function set- ting (0=OFF; 1=semi break-in; 2=full break-in) 48 Send/read manual notch setting (0=OFF; 1=ON) 4C Send/read VSC setting (0=OFF; 1=ON) 4D Send/read Manual AGC setting (0=OFF; 1=ON) 4E Send/read DIGI-SEL setting (0=OFF; 1=ON) 4F Send/read twin peak filter setting (0=OFF; 1=ON) 50 Send/read dial lock function set- ting (0=OFF; 1=ON) 53 Send/read RX antenna connector setting (0=OFF; 1=ON) 19 00 Read the transceiver ID 1A 00 Send/read memory contents (see p. 14-9 for details) 01 Send/read band stacking register contents (see p. 14-9 for details) 02 Send/read memory keyer con- tents (see p. 14-9 for details) Command 1A Sub command Description 03 Send/read the selected filter width (SSB, CW, PSK: 0=50 Hz to 40=3600 Hz; RTTY: 0=50 Hz to 31=2700 Hz; AM: 0=200 Hz to 49=10 kHz) 04 Send/read the selected AGC time constant (0=OFF, 1=0.1/0.3 sec. to 13=6.0/8.0 sec.) 050001 Send/read SSB RX HPF/LPF 050002 050003 050004 050005 050006 050007 050008 050009 050010 050011 050012 050013 050014 050015 050016 050017 050018 050019 050020 050021 050022 (HPF: 0=Through, 1=100 to 20=2000, LPF: 5=500 to 24=2400, 25=Through) Send/read SSB RX Tone (Bass) level (0 =-5 to 10=+5) Send/read SSB RX Tone (Treble) level (0=-5 to 10=+5) Send/read AM RX HPF/LPF (HPF: 0=Through, 1=100 to 20=2000, LPF: 5=500 to 24=2400, 25=Through) Send/read AM RX Tone (Bass) level (0 =-5 to 10=+5) Send/read AM RX Tone (Treble) level (0=-5 to 10=+5) Send/read FM RX HPF/LPF (HPF: 0=Through, 1=100 to 20=2000, LPF: 5=500 to 24=2400, 25=Through) Send/read FM RX Tone (Bass) level (0 =-5 to 10=+5) Send/read FM RX Tone (Treble) level (0=-5 to 10=+5) Send/read CW RX HPF/LPF (HPF: 0=Through, 1=100 to 20=2000, LPF: 5=500 to 24=2400, 25=Through) Send/read RTTY RX HPF/LPF (HPF: 0=Through, 1=100 to 20=2000, LPF: 5=500 to 24=2400, 25=Through) Send/read PSK RX HPF/LPF (HPF: 0=Through, 1=100 to 20=2000, LPF: 5=500 to 24=2400, 25=Through) Send/read SSB TX Tone (Bass) level (0 =-5 to 10=+5) Send/read SSB TX Tone (Treble) level (0=-5 to 10=+5) Send/read AM TX Tone (Bass) level (0 =-5 to 10=+5) Send/read AM TX Tone (Treble) level (0=-5 to 10=+5) Send/read FM TX Tone (Bass) level (0 =-5 to 10=+5) Send/read FM TX Tone (Treble) level (0=-5 to 10=+5) Send/read SSB TX bandwidth for wide (see p. 14-10 for details) Send/read SSB TX bandwidth for mid. (see p. 14-10 for details) Send/read SSB TX bandwidth for narrow (see p. 14-10 for details) Send/read speech level (0=0% to 255=100%) 14-4