Icom IC-7700 Instruction Manual - Page 145
Antenna memory settings
View all Icom IC-7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
■ Antenna memory settings ANT Band keys ANT MW F-3 10 ANTENNA TUNER OPERATION This function stores the antenna connector number for each frequency band. q Push EXIT/SET several times to close multi-function screen, if necessary. w Push and hold [ANT] (MF1) for 1 sec. to select antenna set screen. e Select the desired frequency band with a band key. r Push [ANT] (MF1) several times to select the desired antenna number that you want to set for the selected frequency band. • "★" appears. t Push and hold [ANT MW] F-3 for 1 sec. to store the antenna selection into the antenna memory. • "★" disappears. y Repeat the steps e to t to store the antenna selection for another frequency bands, if desired. u Push EXIT/SET to exit antenna set screen. D Antenna type selection ∫ √ F-1 F-2 ANT TYPE F-7 When no antenna is connected to [ANT2], [ANT3], and/or [ANT4], these antenna connectors can be deactivated - deleting the antenna number from the available selections. This prevents the transceiver from accidentally transmitting into an unused antenna connector. In addition, a receive-only antenna can be specified for [ANT4]. q Select the antenna set screen as described above. w Push [ANT TYPE] F-7 to select antenna type set screen. e Push [Y] F-1 or [Z] F-2 to select the desired an- tenna. r Rotate the main dial to select the desired antenna condition from TX/RX, RX (ANT4 only) and OFF. • TX/RX : Select when an antenna is connected. • OFF : Select when no antenna is connected. • RX : Select when a receive only antenna is connected. (available for the [ANT4] only) t Push EXIT/SET to exit antenna type set screen. ✔ For your information The "OFF" antennas cannot be selected with [ANT] (MF1) switch operation, or with the antenna memory setting. When "RX" is selected for [ANT4], "1/R," "2/R" and "3/R" selections will be added for the selection for both [ANT] (MF1) switch operation and the antenna memory setting. In these selections, the antenna connected to [ANT1], [ANT2] and/or [ANT3] will be used for transmission and the antenna connected to [ANT4] will be used for reception. 10-3