Icom IC-7700 Instruction Manual - Page 169
Memopad, Numbers, SPEECH, S-Level, MODE], Switch, Up/Down, Speed, Quick, Clear
View all Icom IC-7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
SET MODE 12 ■ Others set mode (continued) SPEECH S-Level ON The IC-7700 speech processor can announce frequency, mode and signal level. Signal level announcement can be deactivated if desired. (default: ON) When "OFF" is selected, the signal level is not announced. SPEECH [MODE] Switch Selects the operating mode speech capability when a mode switch is pushed; ON or OFF. (default: OFF) When "ON" is selected, the selected operating mode is announced when a mode switch is pushed. OFF Memopad Numbers 5 Sets the number of memo pad channels available. 5 or 10 memo pads can be selected. (default: 5) MAIN DIAL Auto TS Sets the auto tuning step function for the main dial. When rotating the main dial rapidly, the tuning step automatically changes several times as selected. There are 2 type of auto tuning steps: HIGH (Fastest) and LOW (Faster). (default: HIGH) HIGH • HIGH • LOW • OFF : Auto tuning step is turned ON. Fastest tuning step during rapid rotation. (default) : Auto tuning step is turned ON. Faster tuning step during rapid rotation. : Auto tuning step is turned OFF. MIC Up/Down Speed Sets the rate at which frequencies are scanned when the microphone [UP]/[DN] switches are pushed and held. HIGH or LOW can be selected. HIGH • HIGH : High speed (default; 50 tuning steps/sec.) • LOW : Low speed (25 tuning steps/sec.) Quick RIT/∂TX Clear Selects the RIT/∂TX frequency clearing instruction with the CLEAR switch. OFF • ON : Clears the RIT/∂TX frequency when CLEAR is pushed momentarily. • OFF : Clears the RIT/∂TX frequency when CLEAR is pushed and held for 1 sec. (default) 12-15