Icom IC-7700 Instruction Manual - Page 141

SCANS 9 ■ Setting select memory channels D Setting in scan screen q Push EXIT/SET several times to close a multi-func- tion screen, if necessary. w Select memory mode. e Push [SCAN] F-5 to select the scan screen. r Select the desired memory channel to set as a se- lect memory channel. keys and direct keypad selections can be used. t Push [SELECT] F-3 several times to set the mem- ory channel as a select memory ★1, ★2, ★3 or not. y Repeat steps r to t to program another memory channel as a select memory channel. u Push EXIT/SET to exit the scan screen. D Setting in memory list screen q Push EXIT/SET several times to close a multi-func- tion screen, if necessary. w Push [MEMORY] F-4 to select memory list screen. e Rotate the main dial while pushing [ROLL] F-1 or [SET] F-2 to select the desired memory channel. keys and direct keypad selections can be used. r Push [SELECT] F-3 several times to set the memory channel as a select memory ★1, ★2, ★3 or not. t Repeat steps e to r to program another memory channel as a select memory channel. y Push EXIT/SET to exit the memory list screen. D Erasing the select scan setting q Push EXIT/SET several times to close a multi-func- tion screen, if necessary. w Push [MEMORY] F-4 to select memory list screen, or push [SCAN] F-5 to select scan screen. e Push and hold [SELECT] F-3 for 1 sec. to display memory select all clear window. r Push one of the following keys to clear all select scan setting. [★1] F-1 : Clears all ★1 setting. [★2] F-2 : Clears all ★2 setting. [★3] F-3 : Clears all ★3 setting. [★1,2,3] F-4 : Clears all select setting. t Push EXIT/SET to exit the memory list screen. 9-7