Icom IC-7700 Instruction Manual - Page 170
DIGI-SEL, Operation, NOTCH], Switch, Auto/Manual, SSB/CW, Synchronous, Tuning, Normal
View all Icom IC-7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
12 SET MODE ■ Others set mode (continued) [NOTCH] Switch (SSB) Selects notch functions for SSB mode operation from Auto, Manual and Auto/Manual. Auto/Manual • Auto : Only the auto notch can be used. • Manual : Only the manual notch can be used. • Auto/Manual : Both the auto and manual notch can be used. (default) [NOTCH] Switch (AM) Selects notch functions for AM mode operation from Auto, Manual and Auto/Manual. Auto/Manual • Auto : Only the auto notch can be used. • Manual : Only the manual notch can be used. • Auto/Manual : Both the auto and manual notch can be used. (default) DIGI-SEL VR Operation Selects [DIGI-SEL] control function from DIGI-SEL and APF. DIGI-SEL • DIGI-SEL : [DIGI-SEL] control functions as the digi- tal selector operation. (default) • APF : [DIGI-SEL] control functions as the audio peak filter adjustment. SSB/CW Synchronous Tuning Selects the displayed frequency shift function from ON and OFF. (default: OFF) When this function is activated, the audio pitch or tones of the received signal will remain the same even when the operating mode is changed between SSB and CW. The amount of frequency shift may differ according to the CW pitch setting. OFF • ON : The displayed frequency shifts when the operating mode is changed between SSB and CW. • OFF : The displayed frequency does not shift. CW Normal Side Selects the side band used to receive CW in CW normal mode. (default: LSB) LSB APF Type Select audio filter shape for APF from SOFT and SHARP. (default: SOFT) SOFT • SOFT : Soft filter shape makes distinguishing noise and signals easier. The audio filter width is related to the CW pitch setting. • SHARP : Sharp filter shape rejects interfering signals more aggressively. 12-16