Icom IC-7700 Instruction Manual - Page 51
Drive gain adjustment
View all Icom IC-7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
D Drive gain adjustment METER [DRIVE] Drive gain range 5 9 +20 +40 1 +60dB 5 10 S 0 ID Po 0 10 SWR 10 COMP 50 1.5102 ALC ∞ 100 150 3 20 200 15 250 W A dB 44 52V VD 3 BASIC OPERATIONS The drive gain is active for all modes other than SSB mode with speech compressor OFF. The [DRIVE] control adjusts the gain of the driver stage. Before transmitting, monitor your selected operating frequency to make sure transmitting won't cause interference to other stations on the same frequency. q Push [METER] (MF2) to select the ALC meter. w Push [PTT] (microphone; SSB with [COMP] ON, AM or FM), key down (CW) or push TRANSMIT (RTTY or PSK) to transmit. e While talking into the microphone, keying down or transmitting, rotate [DRIVE] so that the ALC meter reading is between 30 to 50% of the ALC scale. (see left) • Talk into the microphone at your normal voice level. r Release [PTT], stop keying or push TRANSMIT again to return to receive. 3-13