Icom IC-7700 Instruction Manual - Page 211

16 UPDATING THE FIRMWARE IC-7700 Firm Utility Firmware File Name IC-7700 IP Address Connecting to the IC-7700. Connected to the IC-7700. Transfer in progress... Transfer successful. Start update. Please wait a while. Version 1.00 (C) 2007 Icom Inc. o The screen as at left is displayed. • The following dialog appears in the IC-7700 display. RWARNING!: NEVER turn the IC-7700 power OFF at this stage. The transceiver firmware will be corrupted. Firmware up dating for the main CPU is completed. Turn the IC-7700 power OFF, then ON again with [POWER] switch. After turning the power ON, the IC-7700 will work with the updated firmware. The sub CPU and/or DSP firmware update will start automatically depending on the updated contents, and this will take approx. 2 minutes. DO NOT turn the IC-7700 power OFF until the normal operational screen appears. !0 Click [OK] to finish the firmware update. • The "FIRMWARE UPDATING" dialog as above disappears. !1 Push POWER to turn the IC-7700 power OFF, then ON again. Click [OK] to finish the firmware update. SCOPE-DSP UPDATING... Please wait for 10sec. WARNING! NEVER turn power OFF. TRX-DSP UPDATING... Please wait for 25sec. WARNING! NEVER turn power OFF. !2 Depending on the update, one or two dialog boxes as at left appear on the IC-7700 display in sequence. RWARNING!: NEVER turn the IC-7700 power OFF at this stage. The transceiver firmware will be corrupted. !3 After the dialog disappears, the firmware update is completed and normal operation screen appears. 16-9