Icom IC-7700 Instruction Manual - Page 62

4 RECEIVE AND TRANSMIT D Contest number set mode ∫ √ DEF EXIT/SET F-1 F-2 F-4 • Contest number set mode screen Main dial This menu is used to set the contest (serial) number and count-up trigger, etc. • Setting contents q During CW mode operation, push [KEYER] F-3 to select memory keyer screen. w Push EXIT/SET to select memory keyer menu, then push [001] F-3 to select contest serial number set mode. e Push [Y] F-1 or [Z] F-2 to select the desired set item. r Set the desired condition using the main dial. • Push and hold [DEF] F-4 for 1 sec. to select the default condition or value. t Push EXIT/SET twice to normal screen. Number Style This item sets the numbering system used for contest (serial) numbers- normal or short morse numbers. Short morse numbers are also referred to as "cut" numbers. Normal • Normal : Does not use short morse numbers (default) • 190➔ANO : Sets 1 as A, 9 as N and 0 as O. • 190➔ANT : Sets 1 as A, 9 as N and 0 as T. • 90➔ NO : Sets 9 as N and 0 as O. • 90➔ NT : Sets 9 as N and 0 as T. Count Up Trigger This selects which of the four memories will contain the contest serial number exchange. The count-up trigger allows the serial number to automatically increment after each complete serial number exchange is sent. M2 • M1, M2, M3 and M4 can be set. (default: M2) Present Number This item shows the current number for the count-up trigger channel set above. 001 • Rotate the main dial to change the number, or push and hold [001CLR] F-4 for 1 sec. to reset the current number to 001. 4-10