Icom IC-7700 Instruction Manual - Page 163
ACC set mode, Display set mode
View all Icom IC-7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
SET MODE 12 ■ ACC set mode (continued) REF IN/OUT Selects the transceiver's reference signal condition from IN, OFF and OUT. OFF • IN : Use an external reference signal for the IC7700. Turn the transceiver power OFF then ON to make the setting effective. • OFF : Not input/output the reference signal. (default) • OUT : Outputs the IC-7700 reference signal to externally connected equipment(s) for their reference. NOTE: If the applied reference signal is off-frequency, or no signal is applied with "IN" selection, the IC-7700 will not work properly. Select "OFF" or "OUT" then reboot the IC-7700 in such case. REF Adjust Adjusts the internal reference signal frequency within 0 to 100% range in 1% steps during frequency calibration. 50% NOTE: Default setting is different for each transceiver. ■ Display set mode LCD Unit Bright Adjusts the LCD unit brightness from 0 (dark) to 100% (bright) range in 1% steps. (default: 50%) 50% Backlight (Switches) 80 Adjusts the switch indicators brightness from 1 (dark) to 100 (bright) range in 1 steps. (default: 80) Display Type Selects the desired display type from A (Black back) and B (Blue back). (default: A) A See p.13-4 for details. Display Font Selects the desired font for frequency readout from Basic (1), Basic (2), Italic, Round and Slim. (default: Basic (1)) Basic (1) See p.13-4 for details. 12-9