Icom IC-7700 Instruction Manual - Page 65
Operating RTTY FSK
View all Icom IC-7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
4 RECEIVE AND TRANSMIT ■ Operating RTTY (FSK) [TX] indicator [RX] indicator Band keys [AF] RTTY/PSK Appears DECODE F-3 Main dial TX buffer screen FFT scope RX contents screen Water-fall A DSP-based high-quality Baudot RTTY encoder/decoder is built-in to the IC-7700. When connecting a PC keyboard (p. 2-6), RTTY operation can be performed without an external RTTY terminal, TNC or PC. If you would rather use your RTTY terminal or TNC, consult the manual that comes with the RTTY terminal or TNC. q Push a band key to select the desired band. w Push RTTY/PSK to select RTTY. • After RTTY mode is selected, push and hold RTTY/PSK for 1 sec. to toggle between RTTY and RTTY-R modes. • "RTTY" or "RTTY-R" appears. e Push [DECODE] F-3 to display the decode screen. • The IC-7700 has a built-in Baudot decoder. r To tune the desired signal, aim for a symmetrical waveform and ensure the peak points align with the mark (2125 Hz) and shift (170 Hz) frequency lines in the FFT scope. • The S-meter indicates received signal strength when signal is received. t Press [F12] on the connected keyboard to transmit. • [TX] indicator lights red. y Type from the keyboard to enter the contents that you want to transmit. • The typewritten contents are indicated in the TX buffer screen and transmitted immediately. • The text color will be changed when transmitted. • Press one of [F1]-[F8] to transmit the TX memory con- tents. u Press [F12] on the keyboard to return to receive. ✔ For your convenience The transmission contents can be typed before being transmitted. q Perform the steps q to r above. w Type from the connected keyboard to enter the message that you want to transmit. • The typewritten contents are indicated in the TX buffer screen. e Press [F12] of the connected keyboard to transmit the typewritten contents. • The color of displayed text, in the TX buffer screen, will be changed when transmitted. • To cancel the transmission, press [F12] twice. r Press [F12] of the keyboard to return to receive. 4-13