Icom IC-7700 Instruction Manual - Page 139
Fine programmed scan/Fine, F scan
View all Icom IC-7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
SCANS 9 ■ Fine programmed scan/Fine ∂F scan In fine scan (programmed or ∂F), the scan speed decreases when the squelch opens, but the transceiver keeps scanning. The scanning tuning step shifts from 50 Hz to 10 Hz when the squelch opens. PROG ∂F F-1 F-2 FINE F-3 EXIT/SET q Push EXIT/SET several times to close a multi-func- tion screen, if necessary. w Push [SCAN] F-5 to select the scan screen. e Set for programmed scan or ∂F scan as described on previous page. r Push [PROG] F-1 or [∂F] F-2 to start a scan. • " PROGRAM SCAN " or " :F SCAN " and decimal points blink while scanning. t Push [FINE] F-3 to start a fine scan. • " FINE PROGRAM SCAN " or " FINE :F SCAN " blinks instead of " PROGRAM SCAN " or " :F SCAN ," respectively. y When the scan detects a signal, the scan speed de- creases but scan does not stop. u Push [PROG] F-1 or [∂F] F-2 to stop the scan; push [FINE] F-3 to cancel the fine scan. • Rotating the main dial also cancels the scan. i Push and hold [RECALL] F-6 for 1 sec. to recall the frequency that is set before starting the scan, if desired. 9-5