Icom IC-7700 Instruction Manual - Page 146

10 ANTENNA TUNER OPERATION ■ Antenna memory settings (continued) D Temporary memory The antenna temporary memory memorizes the manually selected antenna. The selected antenna will be re-called even if frequency band has been changed. q Select the antenna set screen. w Push [TEMP-M] F-4 to turn the temporary mem- ory ON and OFF. e Select the desired frequency band with a band key. r Push [ANT] (MF1) to select the desired antenna. • "★" appears when a different antenna from the original is selected. t Push [ANT MR] F-2 to re-call the original antenna. • "★" disappears. y Push EXIT/SET to exit antenna set screen. "★" indicators appear when a different antenna from the original is selected. Push TEMP-M F-4 to turn the temporary memory ON and OFF. CAUTION!: Before transmitting with the manually selected antenna, make sure the selected antenna is suitable for the operating frequency. Otherwise the transceiver may be damaged. D Antenna selection mode Push [ANT] SW F-6 to select the antenna selection mode. The automatic antenna selection (antenna memory) and the [ANT] (MF1) switch function can be deactivated if desired. q Select the antenna set screen. w Push [[ANT] SW] F-6 to select the antenna selec- tion from Auto, OFF and Manual. • Auto : Use the antenna memory. Antenna selec- tion with [ANT] switch is also available. • OFF : Only the antenna connected to [ANT1] can be used. [ANT] switch is deactivated. • Manual: Deactivate the antenna memory function. Antenna can be selected with [ANT] switch operation only. e Push EXIT/SET to exit antenna set screen. 10-4