Icom IC-7700 Instruction Manual - Page 76
DPSK memory transmission DAutomatic transmission/reception setting
View all Icom IC-7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
4 RECEIVE AND TRANSMIT D PSK memory transmission PT1 F-1 - PT4 F-4 or PT5 - F-1 PT8 F-4 EXIT/SET 1-4/5-8 F-7 Pre-set characters can be sent using the PSK memory. Contents of the memory are set using the edit menu. q During PSK mode operation, push [DECODE] F-3 to select PSK decode screen. w Push [TX MEM] F-4 to select PSK memory screen. e Push [1-4/5-8] F-7 to select memory bank then push one of the function keys ([PT1] F-1 to [PT4] F-4 or [PT5] F-1 to [PT8] F-4 ). • When no keyboard is connected, the selected memory contents will be transmitted immediately. • When a keyboard is connected, the memory contents will be transmitted immediately when function key is pushed, or transmitted after [F12] on the connected keyboard is pressed, depending on auto transmission/reception setting (see below). • The transmission date, time, reception date and/or time may be displayed in RX contents screen, depending on setting. D Automatic transmission/reception setting AUTO TX EXIT/SET F-6 PT1..PT8 F-7 q During PSK mode operation, push [DECODE] F-3 to select PSK decode screen. w Push [TX MEM] F-4 to select PSK memory screen, then push [EDIT] F-6 to select PSK memory edit screen. • PSK memory contents of Channel 1 (PT1) is selected. e Push [PT1..PT8] F-7 several times to select the desired PSK memory. r Push [AUTO TX] F-6 several times to select the desired condition, as follows. • AUTO TX/RX : Automatically transmits the selected memory and returns to receive after the transmission. • AUTO TX : Automatically transmits the selected memory. To return to receive, press [F12] on the keyboard. • AUTO RX : Press [F12] on the keyboard to transmit the selected memory. Automatically returns to receive after the transmission. • No indication : Press [F12] on the keyboard to transmit the selected memory and press [F12] again to return to receive. t Push EXIT/SET to return to exit from PSK memory edit condition. NOTE: The transceiver always functions in the "AUTO TX/RX" setting when no keyboard is connected. 4-24