Icom IC-7700 Instruction Manual - Page 49

D Meter type selection ∫ √ DISP EXIT/SET SET F-1 F-2 F-3 F-7 3 BASIC OPERATIONS A total of 3 meter types are available in the IC-7700- Standard, Edgewise and Bar meters. Follow the instructions below for the meter type selection. q Push EXIT/SET several times to return to normal screen, if necessary. w Push [SET] F-7 , then push [DISP] F-3 to select display set mode. e Push [Y] F-1 or [Z] F-2 to select "Meter type (Normal Screen)" item. r Rotate the main dial to select the desired meter type from "Standard," "Edgewise" and "Bar." t Push EXIT/SET to exit display set mode. • Edgewise meter S1 Po 0 3 5 7 9 +20 +40 +60dB 50 100 150 200 250W • Bar meter S 1 3 5 7 9 +20 +40 +60dB Po 0 10 50 100 150 200 250W ■ Voice synthesizer operation SPEECH The IC-7700 has a built-in voice synthesizer to announce the frequency, mode, etc. (S-meter level can also be announced-p. 12-15) in clear, electronically-generated voice, in English (or Japanese). ➥ Push SPEECH to announce the currently selected frequency, etc. • Push and hold SPEECH for 1 sec. to additionally announce the selected mode. ➥ Pushing a mode switch also announces the appropriate mode. (p. 12-15) The output level of the voice synthesizer can be adjusted in level set mode. (p. 12-6) 3-11