Icom IC-7700 Instruction Manual - Page 147
Receive antenna I/O setting
View all Icom IC-7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
D Receive antenna I/O setting Band keys RX-I/O F-1 10 ANTENNA TUNER OPERATION In the default setting, receive antenna connectors, [RX ANT-IN] and [RX ANT-OUT], on the rear panel are deactivated and are connected internally by the switching relay. If you want to connect an external preamp or low-pass filter between the [RX ANT-IN] and [RX ANTOUT], you must activate them as described below. q Select the antenna set screen. w Select the desired frequency band with a band key. e Push [RX-I/O] F-1 to activate the receive antenna connectors ([RX ANT-IN] and [RX ANT-OUT]). • "RX-I/O" indicators appear when [RX ANT-IN] and [RX- ANT-OUT] are active. r Repeat steps w and e, if desired. t Push EXIT/SET to exit antenna set screen. "RX-I/O" indicators appear when [RX ANT-IN] and [RX ANT-OUT] are active. Transceiver Transmitter Transmit/Receive ANT switching circuit Receiver IN [RX ANT] OUT Preamp or Low-pass filter, etc. 10-5