Icom IC-7700 Instruction Manual - Page 45
Selecting 1 Hz step, Band edge warning beep, Auto tuning step function
View all Icom IC-7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
D Selecting 1 Hz step 3 BASIC OPERATIONS A minimum tuning step of 1 Hz can be used for fine tuning. q Push [TS] to turn the quick tuning function OFF. w Push and hold [TS] for 1 sec. to turn the 1 Hz tuning step ON and OFF. 1Hz step indicator D Auto tuning step function ∫ √ OTHERS EXIT/SET SET F-1 F-2 F-5 F-7 D Band edge warning beep When rotating the main dial rapidly, the tuning speed accelerates automatically as selected. q Push EXIT/SET several times to close a multi-function screen, if necessary. w Push [SET] F-7 to select set mode menu screen. • Pushing and holding EXIT/SET for 1 sec. also selects set mode menu screen. e Push [OTHERS] F-5 to enter Others set mode. r Push [Y] F-1 or [Z] F-2 to select "MAIN DIAL Auto TS." t Rotate the main dial to select the desired condition from HIGH, LOW and OFF. • HIGH : Approx. 5 times faster when the tuning step is set to 1 kHz or smaller steps; approx. 2 times faster when the tuning step is set to 5 kHz or larger steps. • LOW : Approx. 2 times faster • OFF : Auto tuning step is turned OFF. y Push EXIT/SET to exit the set mode. When you tune outside of an amateur band's frequency range, a warning beep sounds. This function can be turned OFF in set mode, if desired. q Push EXIT/SET several times to close a multi-function screen, if necessary. w Push [SET] F-7 to select set mode menu screen. • Pushing and holding EXIT/SET for 1 sec. also selects set mode menu screen. e Push [OTHERS] F-5 to enter Others set mode. r Push [Y] F-1 or [Z] F-2 to select "Beep (Band Edge)." t Rotate the main dial to turn the band edge warning beep ON and OFF. y Push EXIT/SET to exit the set mode. 3-7