Kenwood TS-990S Operation Manual - Page 128

5 ASSISTING YOUR SMOOTH QSO SENDING THE NEWLINE CODE AT THE START AND END OF TRANSMISSION The new line code (CR+LF) can be transmitted when the RTTY communication begins and ends. The RTTY message begins and ends with a new line in the decode display of the receiving station making it easier to view the transmitted RTTY message. DISPLAYING THE TIME STAMP You can display the timestamp whenever transmission and reception alternate. You can display frequency information as well as the timestamp. 1 Select Group No. 2, "Decoding & Encoding", from the Menu screen. 2 Access Menu 05, "Automatic Newline Insertion". 3 Press [SELECT] (F4) to allow editing of the parameter box. 1 Select Group No. 2, "Decoding & Encoding", from the Menu screen. 2 Access Menu 13, "CW/RTTY/PSK Time Stamp". 3 Press [SELECT] (F4) to allow editing of the parameter box. 4 Press [-] (F4) or [+] (F5) to select "On" or "Off". The default is "On" (sending a newline code). Selecting "Off" does not allow the transceiver to send a newline code. 5 Press [ ] (F1). 6 Press [MENU] to exit. 4 Press [-] (F4) and [+] (F5) to select "Off" (do not display), "Time Stamp" (display the time only), or "Time Stamp + Frequency" (display the time and frequency). The default is "Time Stamp + Frequency". 5 Press [ ] (F1). 6 Press [MENU] to exit. 5-48 Index Contents