Kenwood TS-990S Operation Manual - Page 291
Symptoms Encountered During Recording And Playing, Break], Optical
![]() |
View all Kenwood TS-990S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 291 highlights
TROUBLESHOOTING 18 SYMPTOMS ENCOUNTERED DURING RECORDING AND PLAYING Symptom Common Problem What to do Ref. Page The message appears when [ ] is pressed Timer recording is in process. during the timer recording. Press and hold [(BREAK)] (F4) to abort the timer recording and allow the transceiver to be operable. To continue {page 15-5} As a result of the timer recording, no sound is Mute was active during the timer recording. the timer recording, press [ ]. Be sure that mute is inactive during the audible from the recorded file. timer recording. While muting capability is active, the received audio cannot be {page 4-7} Voice message cannot be recorded. The repeat interval of the voice message The audio source is not configured as desired. You attempt to use the repeat interval only for recorded. Be sure the audio source is correct and the input signal level is appropriate. The repeat interval can function only {page 13-1} does not function. playing of the voice message. when the voice message is played during transmission. This does not {page 13-3} Repeating is disabled. The received audio can be recorded only for The received audio is recorded to the internal 30 seconds. memory. Full time recording is selected. function only for playing. Enable repeating for the channel you wish to repeat. Use a USB flash drive to store the received audio. A maximum recording time for Full time {page 13-3} {page 12-1} recording is 30 seconds despite the {page 13-5} WAV file cannot be played. The audio file has a different file format than destination. The transceiver can play an audio file what the transceiver can play. with the following format. Number of channels: 2, Number of bit: Audio file cannot be deleted. The file is delete protected. 16, sampling frequency: 16 kHz Cancel the delete protection. {page 13-10} The volume to play (reception) is small. The volume to play (transmission) is small. No signal is entered from the OPTICAL IN Rotate the AF (M) control counterclockwise. Rotate the AF (S) control counterclockwise. The sampling rate of the transceiver does not Rotate the [AF] (M) control clockwise to adjust. Rotate the [AF] (S) control clockwise to adjust. The sampling frequency for the entered {page 4-7} {page 4-7} connector. match the sampling rate of the sourcing device. signal is 44.1 kHz and 48 kHz, the {page 2-9} number of bits is 24 or 16. No signal is entered from the OPTICAL OUT The sampling rate of the transceiver does not The sampling frequency for the signal connector. match the sampling rate of the target device. to be transferred is 48 kHz, the number {page 2-9} of bits is 24. Contents Index 18-13
![](/manual_guide/products/kenwood-ts990s-operation-manual-3ab92e4/291.png)