Kenwood TS-990S Operation Manual - Page 222

14 VOICE GUIDANCE AUTOMATICALLY ANNOUNCING VOICE GUIDANCE When voice guidance is enabled, voice guidance is announced automatically upon certain operations. 1 Select Group No. 1, "Audio Performance", from the Menu screen. 2 Access Menu 06, "Automatic Voice Guidance". 3 Press [SELECT] (F4) to enable editing of the parameter box. 4 Press [-] (F4) or [+] (F5) to select "On". The default is "Off". 5 Press [ ] (F1). 6 Press [MENU] to exit. Note: ◆◆With the transceiver power OFF, press [ ] while pressing down [PF A] to start up the transceiver with Voice Guidance enabled. If auto voice guidance is enabled, announcement is made as follows. Transceiver Behavior Power ( ) ON Toggling between VFO mode and Memory Channel mode Key Operation Announcement Operating data is announced - regardless of the status of the configuration screen. Refer to "Voice 1". [M/V] Refer to "Voice 1". Memory shift [M V] Announces the content in VFO [M VFO] (F) mode. Refer to "Voice 1". Switching to Quick Memory Channel mode [MR] Announces the content of Quick Memory Channel mode. Refer to "Voice 1". Switching Memory Channels in Single-band Memory mode Rotate the MULTI/CH control "Channel" + Number + (S/D/P/ blank) + Frequency No announcement if the Memory Channel List screen is open. Transceiver Behavior Key Operation Announcement Entering split frequency Confirming split frequency Changing the Low Cut frequency Press and hold [TX] (S) The numeric keypad or [TX] (S) Rotate the LO/ WIDTH control "Split" + "Enter" "Split" + "TX " + Sub band frequency "Low" + frequency Changing width Changing the High Cut frequency Rotate the LO/ WIDTH control Rotate the HI/ SHIFT control "Width" + frequency "High" + frequency Changing shift frequency Rotate the HI/ SHIFT control "Shift" + frequency Changing transmit power Rotate the PWR control "TX power" + number Enabling or disabling the timed [TIMER] "Timer" + (On/Off) task by a timer Switching dimmer [DIM] "D" + 1 digit number Switching antenna [ANT] (F) "Antenna" + number Band direct key Selecting band direct (including [GENE1] and Frequency [GENE2] Using the operation) emergency contact configuration [EMERGENCY] (PF) "Emergency" + "Frequency" frequency Analog: (Power/SWR/ID/ Processor/ALC/VD) "Processor" is announced only if Processor is enabled. Digital: (SWR/ID/Processor/VD/ Switching meter [METER] (F) TMP) "Processor" is announced only if Processor is enabled. Mini-digital: (Power/SWR/ID/ Processor/ALC/VD/TMP) "Processor" is announced only if Processor is enabled. XIT shift Press and hold [XIT] "Split" + "TX" + Frequency Switching Memory Channels in Dualband Memory mode Frequency is entered with the numeric keypad Channel number is entered with the numeric key Switching frequency entry history Switching frequency lock Switching mute function for received audio Switching split operation Rotate the MULTI/CH control ("Split") + (RX/TX) + "Channel" + number + (S/D/P/blank) + frequency No announcement if the Memory Channel List screen is open. [ENT] "Enter" Pressing the numeric key Rotate the MULTI/CH control [LOCK] (M) [LOCK] (S) Number Frequency "Lock" + (On/Off) [MUTE] (M) [MUTE] (S) "Mute" + (On/Off) [TX] (S) [TX] (M) "Split" + (On/Off) Note: ◆◆Refer to "Voice 1" for the announcement contents currently displaying the configuration mode. {page 14-3} 14-2 Index Contents