Kenwood TS-990S Operation Manual - Page 214
Clearing A Voice Message, Configuring Interval Time For Retransmit
View all Kenwood TS-990S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
13 VOICE MESSAGE AND AUDIO FILE CLEARING A VOICE MESSAGE You can clear a recorded voice message. 1 Press a mode key to select SSB, FM, or AM mode. 2 Press [TX MSG] (F2) to open the Voice Message screen. 3 Press [ ] (F2) or [ ] (F3), or rotate the MULTI/CH control to select the voice message channel to be cleared. If [ ] (F2) and [ ] (F3) are unavailable in the function key guide, press [MORE] (F1). An alternate key guide will appear. 4 Press and hold [(DELETE)] (F7) to clear the selected voice message. 5 Press [ESC] to exit. CONFIGURING INTERVAL TIME FOR RETRANSMIT You can configure the interval time to repeatedly play the voice message. 1 Select Group No. 5, "CW Configurations", from the Menu screen. 2 Access Menu 15, "CW/Voice Message Retransmit Interval Time" 3 Press [SELECT] (F4) to enable editing of the parameter box. RECORDING AND PLAYING COMMUNICATION AUDIO You can record the contents of communications and play the recorded audio with this transceiver. You can select an internal or external memory (USB) to save the recorded audio file. The following recording functions are available. MANUAL RECORDING You can record a maximum of 30 seconds of audio data per file to internal memory or a maximum of 9 hours of audio data per file to a USB flash drive. FULL-TIME RECORDING A maximum of 30 seconds of the most recent audio is recorded to a file. TIMER RECORDING (USB FLASH DRIVE ONLY) Audio is recorded to a USB flash drive according to the configured time and conditions. Refer to "CLOCK DISPLAY AND TIMER" for details on how to perform timer recording. {page 15-1} CONFIGURING THE SAVE DESTINATION OF AUDIO FILE You can configure the save destination of the recorded audio files to either internal memory or a USB flash drive. 1 Select Group No. 6, "TX/RX Filters & Misc.", from the Menu screen. 2 Access Menu 01, "Recorded Audio File Storage Location". 3 Press [SELECT] (F4) to allow editing of the parameter box. 4 Press [-] (F4) or [+] (F5) to select from the range from "0 [s]" to "60 [s]". The default is "10 [s]". 5 Press [ ] (F1). 6 Press [MENU] to exit. 4 Press [-] (F4) or [+] (F5) to select an "Internal" (internal memory) or a "USB" (USB flash drive). The default is "Internal" (Internal memory). 5 Press [ ] (F1). 6 Press [MENU] to exit. Note: ◆◆To save on a USB flash drive, insert a USB flash drive into the (USB-A) connector before recording. {page 12-1} 13-4 Index Contents