Kenwood TS-990S Operation Manual - Page 38

2 PANEL DESCRIPTION MAIN SCREEN ⡣ ⡤ ⡣ ⡥ ⡬ ⡪ ⡫ Area A B Display P.AMP TX TUNE 30WPM Description Displays the antenna number. The antenna number changes when you change the antenna. Ref. Page {page 4-22} Appears while the antenna dedicated for reception is active. Appears if "-6 dB", "-12 dB" or "-18 dB" has been selected for the reception attenuator. {page 4-23} {page 6-1} Appears while Receive Preamplifier is active. Appears while Noise Reduction 1 (NR1) is active. Appears while Noise Reduction 2 (NR2) is active. Appears while Noise Blanker 1 (NB1) is active. Appears while Noise Blanker 2 (NB2) is active. Appears while Noise Blanker 1 (NB1) and Noise Blanker 2 (NB2) are active. Appears while the internal antenna tuner is active. " " blinks while in tuning. Appears while an external antenna tuner or the internal antenna tuner for RX is active. " " and " " blinks while tuning. Appears while a transverter is active. {page 5-9} {page 6-13} {page 6-9} {page 4-23} {page 4-23} {page 16-33} Appears and disappears alternately while TX Tuning is active. {page 9-13} Displays the transmit power level. Disappears when the transmit signal is sent through the DRV connector. Displays the keying speed. When rotating the KEY SPEED control, displays the keying speed value (4 to 60 words per minute) in the TX display for two seconds. Displays the date for the local clock. You can select the display format from the English, US and Japanese. Displays the clock in the 24-hour format. Left: Displays the time for the local clock. Right: Displays the time for the second clock ("U" is added to the end of the second clock). Starts blinking when a USB flash drive is connected and lights after the transceiver recognizes the USB flash drive. {page 4-19} {page 5-20} {page 15-1} {page 15-1} {page 12-1} Appears while RIT is active. {page 5-13} Appears while XIT is active. {page 5-13} 2-12 Index Contents