Kenwood TS-990S Operation Manual - Page 60
Changing The Dial Color (sub Screen), Capturing And Saving Screen Images, Selecting The Dimmer
![]() |
View all Kenwood TS-990S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
4 BASIC OPERATIONS 4 Press [-] (F4) or [+] (F5) to select "Font 1", "Font 2", or "Font 3". The default is "Font 1". 5 Press [ ] (F1). 6 Press [MENU] to exit. CHANGING THE DIAL COLOR (SUB SCREEN) You can select the dial color pattern for the sub screen from two patterns. 1 Select Group No. 0, "Basic Configurations", from the Menu screen. 2 Access Menu 03, "Dial Color Pattern". 3 Press [SELECT] (F4) to allow editing of the parameter box. SELECTING THE DIMMER Dimmer is a function to change the brightness of the screen and LED as you wish. CHANGING BRIGHTNESS You can change the brightness of the screens and LEDs using preset dimmer settings (below). For example, you can adjust the brightness to be brighter for daytime operation and darker for nighttime operation. 1 Press [DIM/SEL] to switch the dimmer. Can be selected from "Dimmer 1" to "Dimmer 4". 4 Press [-] (F4) or [+] (F5) to select "Type 1" or "Type 2". The default is "Type 1". 5 Press [ ] (F1). 6 Press [MENU] to exit. ADJUSTING THE DIMMER LEVEL You can create four preset dimmer settings for each of the main display, sub display, and LEDs. You can then use these preset settings to easily adjust the display and LED brightness while operating the transceiver. 1 Press and hold [DIM/SEL] to open the Dimmer screen. CAPTURING AND SAVING SCREEN IMAGES You can capture screen images from the main screen or the sub-screen and save them to a USB flash drive in PNG (.png) format. {page 16-12} 2 Press [ ] (F3) or [ ] (F4) to select "Main Display", "Sub Display", or "LED". 3 Press [-] (F5) or [+] (F6), or rotate the MULTI/CH control to adjust the brightness. Available range is from "5" (dark) to "100" (bright). 4 Press [DIMMER] (F2) to switch the dimmer. Each key press cycles through Dimmer 1 > Dimmer 2 > Dimmer 3 > Dimmer 4 > Dimmer 1. 5 Repeat steps 2 and 3. Note: ◆◆Pressing and holding [(RESET)] (F1) resets the configurations so as to revert to the default. ◆◆Brightness of the "TIMER" LED and the " " LED are fixed while the transceiver power ( ) turns OFF. The configured brightness does not apply. 4-6 Index Contents
![](/manual_guide/products/kenwood-ts990s-operation-manual-3ab92e4/60.png)