Kenwood TS-990S Operation Manual - Page 254
CONFIGURING THE NETWORK ADMINISTRATOR, ■ Configuring the Administrator ID
![]() |
View all Kenwood TS-990S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 254 highlights
16 USEFUL FUNCTIONS CONFIGURING THE NETWORK ADMINISTRATOR If you operate the transceiver via a LAN, it is necessary to configure the LAN administrator ID and password. ' ABC (upper case) 5 Press [SAVE] (F6) to save the text string. Pressing [CANCEL] (F7) clears the entered parameter and reverts to the LAN screen. 6 Press [MENU] to exit. 4 Use the functions keys and the MULTI/CH control to edit the administrator ID. Enter the password using a maximum of 8 alphanumeric characters. The default is "Kenwood". [SPACE] (F1): Press to enter a space. [-] (F2)/[+] (F3): Press to display the previous character or the next character. [ ] (F4) and [ to the left or right. ] (F5): Press to move the cursor [BACK SPACE] (F): Press to delete the character to the left of the cursor. [DEL] (F): Press to delete the character to the right of the cursor. [CHAR] (F): Press to change the character type. Each time you press [CHAR] (F), the character type cycles through the following sequence: ABC (upper case) > abc (lower case) > ÀÁÂ (upper case) > àáâ (lower case) > !"# (symbols) > ABC (upper case) 5 Press [SAVE] (F6) to save the text string. Pressing [CANCEL] (F7) clears the entered parameter and reverts to the LAN screen. 6 Press [MENU] to exit. Note: ◆◆The ID and password are case sensitive. ◆◆To remotely control the transceiver by connecting to a home network using the ARCP-990 Radio Control Program and ARHP990 Radio Host Program, you must also configure the ID and password, which were configured for the transceiver, for the ARCP990 and ARHP-990. For details, refer to the help texts attached to the ARCP-990 and ARHP-990. ◆◆If you used the transceiver connected to a home network, configure 60000 (fixed) for the port number and use TCP for the protocol. ◆◆You cannot use a ";" (semicolon) or 0x80 or any of the following characters for the Administrator ID or password. 16-14 Index Contents
![](/manual_guide/products/kenwood-ts990s-operation-manual-3ab92e4/254.png)