Kenwood TS-990S Operation Manual - Page 237

CLOCK DISPLAY AND TIMER 15 TIMER The transceiver is equipped with a timer, allowing you to use a timed task with one of the following timers. In the Programmable Timer screen, frequencies and the operating mode displayed on the main band and the sub band can instantly be copied. Power On (Programmable Timer) With the transceiver power ( ) turned OFF, the timer task turns the transceiver power ( ) ON at the configured time. Power Off (Programmable Timer) With the transceiver power ( ) turned ON, the timer task turns the transceiver OFF at the configured time. Power On and Power Off (Programmable Timer) The timed task configured for Power On and Power Off can be reserved. Timed Recording (Programmable Timer) The transceiver stores the received audio onto the USB flash drive during the time between the time configured for Power-on and the time configured for Power-off. Sleep Timer (Timer) The transceiver power ( ) turns OFF after the configured time lapse. APO (Automatic Power Off) (Menu 0-33) If a key or control is not operated until the configured time elapses, the transceiver power ( ) turns OFF. CONFIGURING THE PROGRAMMABLE TIMER Time to turn the transceiver power ( ) ON or OFF or the timed task for Programmable Timer can be configured. 1 Press and hold [TIMER/SET] to open the Timer screen. 2 Press [ ] (F2) or [ "Programmable Timer". ] (F3) to select 3 Press [EDIT] (F4) to open the Programmable Timer screen. Contents Index 15-5