Kenwood TS-990S Operation Manual - Page 251
Configuring The Key Repeat Delay Time, Configuring The Keying Speed, Enabling Using Usb Keyboard
![]() |
View all Kenwood TS-990S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 251 highlights
CONFIGURING THE KEY REPEAT DELAY TIME You can configure the delay time until the key repeat begins. 1 Select Group No. 9, "USB", from the Menu screen. 2 Access Menu 02, "Repeat Delay Time (USB Keyboard)". 3 Press [SELECT] (F4) to allow editing of the parameter box. USEFUL FUNCTIONS 16 ENABLING USING USB KEYBOARD TO SEND A MESSAGE If the transceiver is configured as described below, pressing a PF key on the USB keyboard transmits a Voice or text message. • The transmission of a message using a USB keyboard is enabled: • "Voice" or "Message" is assigned to a PF key on a USB keyboard: Refer to the following for the method to assign a voice or a text message to the USB keyboard. • Recording a Voice Message {page 13-1} • CW Message Memory {page 5-22} • Utilizing a RTTY Message Memory {page 5-43} • Utilizing a PSK Message Memory {page 5-61} 1 Select Group No. 9, "USB", from the Menu screen. 2 Access Menu 00, "Send Message by Function Keys (USB Keyboard)". 3 Press [SELECT] (F4) to allow editing of the parameter box. 4 Press [-] (F4) or [+] (F5) to select the delay time. • The delay time can be selected from "1" to "4". • The default is "2". 5 Press [ ] (F1). 6 Press [MENU] to exit. CONFIGURING THE KEYING SPEED You can configure the keying speed for the USB keyboard. 1 Select Group No. 9, "USB", from the Menu screen. 2 Access Menu 03, "Repeat Speed (USB Keyboard)". 3 Press [SELECT] (F4) to allow editing of the parameter box. 4 Press [-] (F4) or [+] (F5) to select "On". The default is "On". 5 Press [ ] (F1). 6 Press [MENU] to exit. Note: ◆◆If two sets of USB keyboards are connected to the transceiver, the transceiver recognizes the USB keyboard connected first. ◆◆You cannot select a channel where no message is stored. ◆◆In FSK or PSK mode, a message can be transmitted following the configuration for the channel where a message is stored. In FSK or PSK mode, a message can be transmitted while the RTTY Encode/Decode screen is open. 4 Press [-] (F4) or [+] (F5), or rotate the MULTI/CH control to select the key repeat speed. • The key repeat speed can be selected from "1" to "32". • The default is "1". 5 Press [ ] (F1). 6 Press [MENU] to exit. Contents Index 16-11
![](/manual_guide/products/kenwood-ts990s-operation-manual-3ab92e4/251.png)