Kenwood TS-990S Operation Manual - Page 49

Menu 7-08 7-09 7-10 7-11 7-12 7-13 7-14 7-15 7-16 7-17 7-18 7-19 Rear Connectors (Group 7) Display Configuration Range Audio Output USB: Audio Output Level (Main Band) USB: Audio Output Level (Sub Band) ACC 2: Audio Output Level (Main Band) ACC 2: Audio Output Level (Sub Band) Optical: Audio Output Level (Main Band) Optical: Audio Output Level (Sub Band) Audio Output Type (Rear Connectors) Output level of the main band from the USB connector audio signal 0 to 100 (in steps of 1) Output level of the sub band audio signal from the USB connector 0 to 100 (in steps of 1) Output level of the main band from the ACC 2 connector audio signal 0 to 100 (in steps of 1) Output level of the sub band audio signal from the ACC 2 connector 0 to 100 (in steps of 1) Output level of the main band audio signal from the OPTICAL OUT connector 0 to 100 (in steps of 1) Output level of the sub band audio signal from the OPTICAL OUT connector Audio output from the rear panel connectors 0 to 100 (in steps of 1) All, Received Audio Only Speaker Output Configuration Speaker output format Normal, Reversed, Mixed USB: Audio Output Configuration USB: Audio output format Normal, Reversed, Mixed ACC 2: Audio Output Configuration ACC 2: Audio output format Normal, Reversed, Mixed Optical: Audio Output Configuration Optical: Audio output format Normal, Reversed, Mixed Antenna Numbers Number of antenna connectors 1/ 2/ 3/ 4 MENU 3 Default Reference Page 100 16-21 100 16-21 50 16-20 50 16-20 100 16-19 100 All Normal Normal Normal Normal 4 16-19 16-6 16-17 16-21 16-20 16-19 4-23 Bandscope (Group 8) Menu Display Configuration Range 8-00 8-01 Bandscope Display during TX TX Audio Waveform Display Common Bandscope Display during the transmission TX AF Waveform display (Sub screen) Off, On On, Off 8-02 Bandscope Maximum Hold Bandscope Peak Hold Off, 10 [s], Continuous 8-03 8-04 Off (Carrier Point), 300, 400, 500, Marker Offset Frequency (SSB Mode) Marker offset frequency in SSB mode 600, 700, 800, 1000, 1500, 2210 [Hz] Frequency Scale (Center Mode) The frequency scale for the center mode Relative Frequency, Frequency Absolute Bandwidth 8-05 8-06 8-07 8-08 8-09 8-10 8-11 8-12 Fixed Mode LF Band Lower Limit (min. 0.03 MHz) Selecting the lower limit frequency for the LF Band in Fixed mode (min. 0.03 MHz) 0.030.000 [MHz] to 0.295.000 [MHz] (in steps of 0.001 [MHz]) Fixed Mode LF Band Upper Limit (max. 0.300 MHz) Selecting the upper limit frequency for the LF Band in Fixed mode (max. 0.300 MHz) 0.035.000 [MHz] to 0.300.000 [MHz] (in steps of 0.001 [MHz]) Fixed Mode MF Band 1 Lower Limit (min. 0.300 MHz) Selecting the lower limit frequency for the MH1 Band in Fixed mode (minimum 0.300 MHz) 0.300.000 [MHz] to 0.517.000 [MHz] (in steps of 0.001 [MHz]) Fixed Mode MF Band 1 Upper Limit (max. 0.522 MHz) Selecting the upper limit frequency for the MF1 Band in Fixed mode (maximum 0.522 MHz) 0.305.000 [MHz] to 0.522.000 [MHz] (in steps of 0.001 [MHz]) Fixed Mode MF Band 2 Lower Limit (min. 0.522 MHz) Selecting the lower limit frequency for the MF2 Band in Fixed mode (minimum 0.522 MHz) 0.522.000 [MHz] to 1.700.000 [MHz] (in steps of 0.001 [MHz]) Fixed Mode MF Band 2 Upper Limit (max. 1.705 MHz) Selecting the upper limit frequency for the MF2 Band in Fixed mode (maximum 1.705 MHz) 0.527.000 [MHz] to 1.705.000 [MHz] (in steps of 0.001 [MHz]) Fixed Mode 1.8 MHz Band Lower Limit Selecting the lower limit frequency (min. 1.705 MHz) for the 1.8 MHz Band in Fixed mode (minimum 1.705 MHz) 1.705.000 [MHz] to 1.995.000 [MHz] (in steps of 0.001 [MHz]) Fixed Mode 1.8 MHz Band Upper Limit (max. 2.0 MHz) Selecting the upper limit frequency for the 1.8 MHz Band in Fixed mode (maximum 2.0 MHz) 1.710.000 [MHz] to 2.000.000 [MHz] (in steps of 0.001 [MHz]) Default Reference Page Off On 10 [s] 7-10 9-13 7-8 500 [Hz] 7-4 Relative Frequency 7-4 0.130.000 [MHz] 7-6 0.140.000 [MHz] 7-6 0.470.000 [MHz] 7-6 0.480.000 [MHz] 7-6 0.750.000 [MHz] 7-6 1.250.000 [MHz] 7-6 1.800.000 [MHz] 7-6 2.000.000 [MHz] 7-6 Contents Index 3-7