Kenwood TS-990S Operation Manual - Page 129

SELECTING THE TIMESTAMP TIME You can select whether the time configured for the Local Clock or the Secondary Clock is applied to the time displayed for the timestamp. ASSISTING YOUR SMOOTH QSO 5 RTTY ParameterS CONFIGURING THE MARK FREQUENCY You can configure the mark signal frequency used for communication in RTTY (FSK) mode. The tone at 1275 Hz is called low tone and the tone at 2125 Hz is called high tone. High tone is commonly used nowadays. 1 Select Group No. 2, "Decoding & Encoding", from the Menu screen. 2 Access Menu 14, "Clock (CW/RTTY/PSK Time Stamp)". 3 Press [SELECT] (F4) to allow editing of the parameter box. 1 Select Group No. 2, "Decoding & Encoding", from the Menu screen. 2 Access Menu 08, "FSK Tone Frequency". 3 Press [SELECT] (F4) to allow editing of the parameter box. 4 Press [-] (F4) and [+] (F5) to select "Local Clock" (use the local clock for time stamp) or "Secondary Clock" (use the secondary clock for time stamp). The default is "Local Clock". 5 Press [ ] (F1). 6 Press [MENU] to exit. 4 Press [-] (F4) or [+] (F5) to select "1275 [Hz]" or "2125 [Hz]". The default is "2125 [Hz]" (high tone). 5 Press [ ] (F1). 6 Press [MENU] to exit. Contents Index 5-49