Kenwood TS-990S Operation Manual - Page 196
Copying Operating Data From The Memory Channel, Memory Shift (memory To Vfo)
![]() |
View all Kenwood TS-990S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
10 MEMORY CHANNELS COPYING OPERATING DATA FROM THE MEMORY CHANNEL You can copy the operating data from a Memory Channel to the VFO or to another Memory Channel. MEMORY SHIFT (MEMORY TO VFO) You can copy the operating data from a Memory Channel to the VFO. This is useful when the frequency to be used is similar to the frequency configured in a Memory Channel. ■ Select a Memory Channel and Copy its Data to the VFO. 1 In Memory Channel mode, rotate the MULTI/CH control to select a Memory Channel. 2 Press [M V] or [ data to the VFO. ] (F6) to copy the operating • The operating data in the selected Memory Channel is copied to the VFO. • Memory Channel mode ends and the transceiver enters VFO mode. • If an operating data is changed temporarily, the changed operating data is copied to the VFO. • You cannot copy operating data from a Program Memory Channel to the VFO. • In Single-band Memory Channel mode, the operating data configured in "Frequency 1" is copied to the VFO of the selected band. • In Dual-band Memory Channel mode, the operating data configured in "Frequency 1" is copied to the main band, the operating data configured in "Frequency 2" is copied to the sub band, and the operating status in "TX/RX Freq." is copied to the VFO. ■ Copy the Memory Channel Data to the VFO on the Memory Channel List Screen 1 Press [M.LIST] (F7) to open the Memory Channel List screen. 2 Press [ ] (F2) or [ ] (F3), or rotate the MULTI/CH control to select a Memory Channel. 3 Press [M V] or [ data to the VFO. ] (F6) to copy the operating • When the operating data is copied to the VFO, the current operating data in the VFO will be cleared. • Memory Channel mode ends and the transceiver enters VFO mode. • You cannot copy operating data from a Program Memory Channel to the VFO. • If "S" appears on the "Type" field in the Memory Channel List screen while in VFO mode, the operating data configured in "Frequency 1" is copied to the VFO of the selected band. • If "D" appears on the "Type" field in the Memory Channel List screen while in VFO mode, the operating data configured in "Frequency 1" is copied to the main band, the operating data configured in "Frequency 2" is copied to the sub band, and the operating status in "TX/RX Freq." is copied to the VFO. 4 Press [ESC] to exit. COPYING OPERATING DATA FROM ONE MEMORY CHANNEL TO ANOTHER MEMORY CHANNEL (CHANNEL TO CHANNEL) You can copy the operating data in a Memory Channel to another Memory Channel. This is useful when sorting the order of the configured Memory Channels. 1 Press [M.LIST] (F7) to open the Memory Channel List screen. 2 Press [ ] (F2) or [ ] (F3), or rotate the MULTI/CH control to select the Memory Channel to copy the operating data. 3 Press [COPY] (F6) to copy the operating data. • If [COPY] (F6) is unavailable in the function key guide, press [MORE] (F1). • The Memory Channel to be copied is highlighted in pink. 4 Press [ ] (F2) or [ ] (F3), or rotate the MULTI/CH control to select the Memory Channel to configure the copied operating data. 5 Press [M.IN] (F4) to exit. • The operating data in the Memory Channel selected in step 2 is copied to the Memory Channel selected at step 4. • Press [CANCEL] (F1) or [ESC] to exit without copying the operating data. Note: ◆◆You cannot copy the operating data in typical Memory Channels and extensive Memory Channels (00 to 99, E0 to E9) to Program Memory Channels (P0 to P9). Additionally, you cannot copy in the reverse direction. ◆◆You cannot copy operating data from a Memory Channel with no operating data configured. 10-6 Index Contents
![](/manual_guide/products/kenwood-ts990s-operation-manual-3ab92e4/196.png)