Kenwood TS-990S Operation Manual - Page 87

ASSISTING YOUR SMOOTH QSO 5 COPYING CUSTOMIZED EQUALIZER DATA You can edit the predetermined equalizer characteristics and copy the equalizer data to User 1 to User 3. 4 Press [ ] (F3) [ ] (F4) and select the target frequency to be adjusted. 5 Press [-] (F5) or [+] (F6), or rotate the MULTI/CH control to adjust the frequency level. 6 Press [ESC] to exit. Pressing [ ] (F1) closes the individual RX Equalizer Adjustment screen and reverts to the RX Equalizer screen. ■ Default RX DSP equalizer levels [dB] Frequency [Hz] HB1 HB2 FP BB1 BB2 FLAT U1 U2 U3 0 -5 +1 +3 +6 +6 0 0 0 0 300 -4 +1 +3 +2 +4 0 0 0 0 600 -5 +1 +3 -8 -1 0 0 0 0 900 -3 +1 +2 -11 -11 0 0 0 0 1200 +2 +3 -20 -11 -18 0 0 0 0 1500 +5 +5 -24 -12 -18 0 0 0 0 1800 +6 +6 -4 -11 -16 0 0 0 0 2100 +6 +6 +3 -11 -12 0 0 0 0 2400 +6 +6 +3 -11 -8 0 0 0 0 2700 +6 +6 +3 -11 -6 0 0 0 0 3000 +6 +6 +3 -12 -6 0 0 0 0 3300 +6 +6 +3 -11 -6 0 0 0 0 3600 +6 +6 +3 -11 -8 0 0 0 0 3900 +6 +6 +3 -11 -12 0 0 0 0 4200 +6 +6 +3 -11 -16 0 0 0 0 4500 +4 +6 +3 -12 -18 0 0 0 0 4800 -5 +6 -5 -11 -18 0 0 0 0 5100 -24 +6 -24 -11 -17 0 0 0 0 1 Press and hold [RXEQ/SEL]. The RX Equalizer screen appears. 2 Press [ ] (F2) or [ ] (F3) to select the equalizer to be stored. Pressing [ADJ.] (F4) on the RX Equalizer screen opens the RX Equalizer Adjustment screen. The equalizer data can be copied from either of the RX Equalizer and RX Equalizer Adjustment screens. 3 In the RX Equalizer screen, press [COPY] (F5) or in the RX Equalizer Adjustment screen, press [COPY] (F7). A message prompting you to specify the destination to store the Equalizer Characteristics appears. 4 Press [USER1] (F2), [USER2] (F3), [USER3] (F4) to specify the destination of the copy. • Copy the equalizer data selected in step 1 to User 1, User 2, or User 3. • After the copy has completed, the message prompting you to specify the destination to copy the Equalizer Characteristics disappears, and the RX Equalizer or RX Equalizer Adjustment screen reappears. • Pressing [CANCEL] (F7) terminates the copy of the equalizer data (without copy) and reverts to the RX Equalizer or RX Equalizer Adjustment screen. Note: ◆◆Each default equalizer characteristics other than User 1 to User 3 can also be changed in the RX Equalizer Adjustment screen. Press and hold [(RESET)] (F2) on the RX Equalizer Adjustment screen to reset the equalizer characteristics to the defaults. ◆◆If the configured levels for one frequency range of the receive DSP equalizer is widely different from the configured levels for the adjacent frequency ranges, the received audio may not be attenuated as configured. ◆◆Touching a point on the RX Equalizer Adjustment screen selects the corresponding band and changes the frequency to the selected level. An alternative way is to touch a rough point followed by finetuning in steps 4 and 5. Contents Index 5-7