Kenwood TS-990S Operation Manual - Page 43
Menu, Menu Configurations, Opening The Menu, Common Operation In The Menu Screen, Menu
View all Kenwood TS-990S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
3 MENU MENU CONFIGURATIONS In the Menu screen, you can configure and edit various functions of this transceiver as well as change the operating environment. This transceiver's Menu contains common functions and configurations, along with 5 sub menus categorized for those sub menu groups. ' ' ' OPENING THE MENU 1 Press [MENU] to open the Menu screen. Displays the acquired IP address.) Displays the operating environment (CONFIG A or CONFIG B). The menu group number and the menu items appear. 2 Press [ group. ] (F2) or [ ] (F3) to select a 3 Press [SELECT] (F4) or [SUB>] to display the menu items of the selected group. 4 Press [ ] (F2) or [ menu item. ] (F3) to select a 5 Press [SELECT] (F4) or [SUB>] to allow editing of the parameter box. The parameter box becomes active, and the parameter can be changed. 6 Press [-] (F4) or [+] (F5) to select a parameter. The parameter for the menu item varies. 7 Press [ ] (F1) to revert to the previous screen. The selected parameter has determined. 8 Press [MENU] to end. Contents Index OPENING THE SUB MENU 1 Press [MENU] to open the Menu screen. 2 Press the function key for the key guide on the right side of the main screen. Following are the sub menu that appears on the screen. Sub Menu Key Guide Summary of Changes Reset Clock LAN AUTO MODE Advanced SWL USB Flash Drive RESET A menu which allows you to reset the transceiver to its default state. CLOCK A menu which allows you to configure the internal clocks. LAN A menu which allows you to configure the connections to your LAN. AUTO MODE A menu which allows you to configure the upper and lower limit frequencies. ADV. An advanced menu that allows detailed advanced configurations including connections to external devices. SWL A key which activates and displays "Short Wave Listener" style horizontal dials with a vertical meter. USB DRIVE A menu which allows you to manage a USB flash drive. COMMON OPERATION IN THE MENU SCREEN • Pressing [MENU TOP] (F) reverts to the Menu screen. • Press [ ] (F2) or [ through the menu groups. ] (F3) to scroll • Each menu can be selected with the operation below. • Rotate the MULTI/CH control. • Press [ ] (F2) or [ ] (F3). Press [UP] or [DOWN]. • The parameter for the menu item with an editable parameter box can be selected as follows: • Rotate the MULTI/CH control. • Press [UP] or [DOWN]. • Press [-] (F4) or [+] (F5). • Press [ ] or [ ]. • Press the [UP] or [DOWN] (microphone). • Pressing and holding [(RESET)] (F1) reverts the parameters to their defaults. CLOSING THE MENU If you finish the configuration or edit in the Menu screen, or if you wish to finish the operation during the menu item configuration, follow the procedure below. The Menu screen closes, the normal screen reappears. 1 Press [MENU] or [ESC]. Note: ◆◆All configurations in the Menu screen can be reset to the default parameters. {page 16-4} ◆◆Menu contents, such as the menu item name and default parameters, are subject to change due to design change and innovations. ◆◆During configuration of the screen saver or the power-on message, pressing [MENU] does not close the Menu screen. 3-1