Konica Minolta AccurioPress C14000 Plockmatic PowerSquare R2L User Manual - Page 107

Jam at stacker outfeed PBS Book Stacker, Miscellaneous paper jams, JAM AT STACKER OUTFEED

Get Konica Minolta AccurioPress C14000 PDF manuals and user guides View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 107 highlights

5 - Troubleshooting - Paper Jams Jam at stacker outfeed (PBS Book Stacker) The error message JAM AT STACKER OUTFEED is displayed. This means a book or some paper-trimmings are covering the sensor at the PBS Book Stacker outfeed. Stacker outfeed Stacker reset button Pusher FIGURE 52. PBS Book Stacker outfeed Stacker outfeed is visible FIGURE 53. Stacker outfeed The pusher is in forward position. The stacker outfeed is not visible. If the stacker outfeed is visible: 1. Remove the book, if present. 2. Check for paper-trimmings and remove them, if present. 3. Press the reset button on the stacker. If the pusher is in the forward position so that the stacker outfeed is not visible: 1. Use your hand to move the pusher to the left, against the spring pressure. 2. Remove the book, if present. 3. Check for paper-trimmings and remove them, if present. 4. Press the reset button on the stacker. Miscellaneous paper jams If a range of different paper jam problems occur, it can help to clean the following parts: • the outfeed - see "Clean excess grease from the Stitch Head" on page 124. • parts of the optional book stacker - see "Clean excess grease from the Stitch Head" on page 124. • the optional two-knife trimmer - see "Clean the Side-Trimmer Book Supports" on page 135. Plockmatic PowerSquare™224 User Manual 101

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
5 - Troubleshooting - Paper Jams
Plockmatic PowerSquare™224 User Manual
101
Jam at stacker outfeed (PBS Book Stacker)
The error message
JAM AT STACKER OUTFEED
is displayed.
This means a book
or some paper-trimmings are covering the sensor at the PBS Book Stacker
outfeed.
If the stacker outfeed is visible:
1.
Remove the book, if present.
2.
Check for paper-trimmings and remove them, if present.
3.
Press the reset button on the stacker.
If the pusher is in the forward position so that the stacker outfeed is not visible:
1.
Use your hand to move the pusher to the left, against the spring pressure.
2.
Remove the book, if present.
3.
Check for paper-trimmings and remove them, if present.
4.
Press the reset button on the stacker.
Miscellaneous paper jams
If a range of different paper jam problems occur, it can help to clean the
following parts:
•
the outfeed - see “Clean excess grease from the Stitch Head” on page 124.
•
parts of the optional book stacker - see “Clean excess grease from the Stitch
Head” on page 124.
•
the optional two-knife trimmer - see “Clean the Side-Trimmer Book Supports”
on page 135.
FIGURE 52.
PBS Book Stacker outfeed
Stacker outfeed
Stacker reset button
Pusher
FIGURE 53.
Stacker outfeed
Stacker outfeed
is visible
The pusher is in
forward position.
The stacker out
-
feed is not visible.